Archive

You are currently browsing the Robotic Mower – Robotic Lawn Mower blog archives for February, 2011.

Feb

15

Push Lawn Mower

By admin

Buying a lawn mower can be even more complicated than buying a car because these are available in variety of models, including gas propelled mowers, electric mowers, and riding mowers and tractors. You will have to choose the right mower for your lawn size and terrain.

Push Lawn Mower

Push Lawn Mower

Push Lawn Mower works pretty well then it depends on the brand, if the grass is fine textured like blue grass, fine fescue, you should have no problem in pushing throw the mower on it, This is what drives us to try and keep our lawn looking lush and green, when lawn is in great condition it is pleasure to look at and joy to walk and play on and it will be a great fun for kids.

Caring and maintaining your lawn is not always fun and games. it takes a more time and care along with the right tools so that can be able to achieve great results. When it comes to your lawn it is pretty much all comes down to your personal preference you have a powered push “PUSH LAWN MOWER” which are great in cutting grass and any thing else in its way it has plenty of power and lawn can be bumpy and even then it wont affect the performance of the lawn mower. As long as your lawn is established and relatively flat and you are looking for a bit more exercise they are the ones to choose. These mowers are where you walk behind the mower as if your were pushing it but just to guide it as it propels itself among as it cuts the grass.

This lawn mower has a wide use in cutting lawns of various types, its human friendly and pollution free .It has a distinct place in the market for its performances and durability .It has a major parts Briggs and Stratton,these parts are designs to fit right the first time and last longer .

Push Lawn Mower is an environment friendly but it will be quite difficult to maintain to a quite large lawns as it needs an human support and energy. As a reason people are safer side and going for an electric lawn mowers and fuel lawn mowers. In general start a push lawn mower that can run on gasoline. Usually there will be a cap on the top of the mower the cap will probably have an oil gauge attached. Push it between three to four times in order to force the gasoline in to the lines. Never place any part of your body near the lawn mower blades if there is even slight chance of the mower starting up.

Mower includes long pants to protect against flying sticks stones and grass a hat and or sunglasses to keep reach out of sun out of your eyes. most of the mower in the modern days don’t need oil for not for less than year. To avoid missing spots make sure that the cut and uncut grass stays inside the mowers far wheel. Start by mowing along the entire perimeter. Up on the direction reverse beside it, moving gradually until the end.

In simple way over all view of a Push Lawn Mower will be check the level of oil. wear ear protection, pick up any toys, big sticks, and rocks, pull all weeds edge grass perimeters first, start the mower, cut the grass, cut in opposing lines, and now in different directions to prevent graining, check the grass collector from time to time ,if it is full just have to empty on suitable compost heap or garden dump. When all are desired grass is cut turn off the engine. Place the mower back where it is stored. you can cut the grass as any time of the day, as long as its not about to be dark in order to avoid the injuries .and very important is to wear golf shoes while you mow. Be careful going around trees ,if you have to right up against the base. The edge of the mower will be sharp and as it may damage your trees also, particularly the small ones. And for speed use full width of the mowers blade on every pass. do quick turns, balancing the lawn mower well on its back wheels. And build safe speed on the straights ,there you can develop a strategy or mowing pattern for getting your yard done .in the short period. In case of increasing the speed, keep a loose and safe grip on the bar, wiggle around your fingers keep your arms loose, so your legs can provide a power. And straight arms can provide the power, and help to transfer the power from your legs.

When moving a “PUSH LAWN MOWER” important thing is that never wear sandals, or other open toed shoes when moving the lawn. Always put safer first never put safety out of control of the mower or yourself. And beware of slick grass.

Feb

15

REEL LAWN MOWERS Review

By admin

When you think of mowing the sudden image comes to our mind is that of something called rotatory machine, where as REEL LAWN MOWERS is a grass cutting device. Unless you have used reel lawn mowers has an engine. It is invented by a man called Edwin budding in 19th century, It has a sharp blades to cut the grass, but the power is supplied to the machine from our own muscles.

Reel Lawm Mower

Reel Lawm Mower

Environment will be clean; it offers many benefits in safety, noise level, maintenance, and cost also. Modern machines will be easier to use than older models, and it appeal to many types of people, environmentalists, frugal, exercise fanatics haters of machine maintenance, hoe ever you should be committed to move when the grass is ready not whenever you get around to do it. And unless you don’t mind the extra work of raking up twigs before hand, don’t use the machine for large areas with lots of trees, since you can’t ride rough over twigs.

REEL LAWN MOWERS are cheap, including no maintenance costs, safe, pollution free, and it’s not good for tall grass or for shredding twigs, leaves. Blades spin on plane parallel to the ground in perpendicular way it has no engine where as it will be push type which means no gas no pollution, no noise, no oil check, no filter to clean, no spark plugs, and it’s of light weight and easy to push. And where as its completely human powered.

Whereas it depends on human force, and the overall construction will be that of small cart with long handle, most of the machines feature two primary wheels on a single axle, with bar of rollers. And secondary wheels in the rear. And rear roller is simply provide the balance, while primary wheels provide the motion to turn the mower easily. A person pushes on the handle bars by applying force, when the force is applied it moves down the handle pushing the mower forward on its wheels. As the axle turns it send a pair of gears spinning. Whereas first gar has a larger diameter than the smaller one.
And the brush bar on the front of the mower bends tall grass folding it over in to the spinning blades, so that it will cut properly. The spinning reel may look impressive, it does not cut the grass itself actually it happens when the spinning edges meet the stationary edges cutter bar. Most of the grass falls behind the mower, allowing for the use of collection tray on the bag.

REEL LAWN MOWER are very simple and human friendly; there these are four kinds of mowers, push, and walk behind power, riding power, and tow behind gang mower. Where push mowers are very simple and powered by human beings to push them and it is used in small lawns. it is driven independently and is used for golf greens.

Currently there are two cutting mechanisms are very common in our daily life .Mowers are those with a set of blades and a stationary horizontal blade, where the axle is attached to gear mounted in one of the wheel in order to spin the blades for grass cutting even when mower moves slowly it helps to cut the grass. Secondly those who blades spin horizontally on a vertical draft, and fast cutting will be due to blades will be striking the grass in very high speed.

Where the above two Mechanisms of  REEL LAWN MOWER lead to different kind of results finally, where as in the rotary mowers where as the blade will not be sharp enough to cut the grass cleanly .the cylinder type mowers and manual mowers usually work by scissor on blades.”REEL LAWN MOWERS” need power for two purposes one is to cut and another one is to move. The act of pushing and pulling a reel mowers power for cutting and moving at the same time. The grass cutting may be powered by either an internally or electric motor even. While the power source are supplied by the user or another external source.